Toleeto Fasteners - Cord-Lox cable wraps
Toleeto Fasteners - Cord-Lox cable wraps
The Closed Loop model was our first design, and it's still one of the most popular. You simpy insert the end of the cord through the opening in the middle, then pinch it around the cord. It will stay on the cord until you take it off. Then just coil up the cord and wrap the Cord-Lox around it.
The Open Loop Series is perfect for cables with large connectors or plugs. The center section is overlapped, but only sealed on one side. Lift up the unsealed side, lay the cord in the opening and press the flap down around the cord. Then wrap the Cord-Lox around the coiled cable. Like the Closed Loop model, it will stay on the cord until you remove it.
If you rent sound, lighting or video equipment, the Rivet Series model is the one for you. These straps come with variable pre-punched holes and a plastic snap rivet. Wrap the strap around the cord with the hook side facing out, and snap the male and female halves of the rivet together. Then wrap the Cord-Lox around the coiled cable. Super easy! And it can't be removed, which makes it great for identification.
Don't leave expensive cables lying on the floor where they can be stepped on or rolled over. Hang 'em up and out of the way with the Buckle & Grommet Series. Just slip the end of the strap through the plastic buckle, cinch tight and attach it to itself, and hang it up. Great for studios, workshops and equipment vans
The Closed Loop model was our first design, and it's still one of the most popular. You simpy insert the end of the cord through the opening in the middle, then pinch it around the cord. It will stay on the cord until you take it off. Then just coil up the cord and wrap the Cord-Lox around it.
The Open Loop Series is perfect for cables with large connectors or plugs. The center section is overlapped, but only sealed on one side. Lift up the unsealed side, lay the cord in the opening and press the flap down around the cord. Then wrap the Cord-Lox around the coiled cable. Like the Closed Loop model, it will stay on the cord until you remove it.
If you rent sound, lighting or video equipment, the Rivet Series model is the one for you. These straps come with variable pre-punched holes and a plastic snap rivet. Wrap the strap around the cord with the hook side facing out, and snap the male and female halves of the rivet together. Then wrap the Cord-Lox around the coiled cable. Super easy! And it can't be removed, which makes it great for identification.
Don't leave expensive cables lying on the floor where they can be stepped on or rolled over. Hang 'em up and out of the way with the Buckle & Grommet Series. Just slip the end of the strap through the plastic buckle, cinch tight and attach it to itself, and hang it up. Great for studios, workshops and equipment vans
posted by Harmony Central at 2:26 PM
0 Comments:
Post a Comment
<< Home